Light Bar LED Information:
Samsung 3000K White LEDs – 140 per Light Bar
Samsung 5000K White LEDs – 140 per Light Bar
660nm Deep Red LEDs – 15 per Light Bar
Made In The USA – Using the finest quality LED Chips & Aluminum PCB
Warranty: 3 Year Limited Warranty Included
More Details Below ↓↓↓
Compare Our 1000 Watt Commercial Model
Choose Your Light
Coverage Area
Power Draw
Number of Light Bars
Light Spread Rating
Dimming Range
System Efficacy
Total PPF
Market Price
Price / light bar
Price / watt
Price / µmole
Value vs Performance
X6-1000
Commercial Grade
5 x 5 standard | 6 x 6 max
1000 Watts
6 Light Bars
Good Light Spread
5-100%
2.58 µmole/J
2450 µmoles
$1599
$267 / bar
$1.60 / watt
$0.65 / µmole
Best Performance in 5 x 5
Passive Cooling Linear Bar Design
Thin Profile – Only 1.375in Tall
Rugged T Slot Bar Design
Oversized surface area for maximum heat dissipation
Remote Power Driver Location
Lower your heat load by removing power driver outside grow area
Growcraft Yield Max Flowering | Full Cycle Spectrum
SPECTRAL POWER DISTRIBUTION
Growcraft Yield Max Vegetative Spectrum
SPECTRAL POWER DISTRIBUTION
PAR Intensity Maps
5’x5′ Canopy Area – 6 inch Hanging Height
Average PPFD – 1247 µmol/(m2s)
5’x5′ Canopy Area – 12 inch Hanging Height
Average PPFD – 1187 µmol/(m2s)
5’x5′ Canopy Area – 18 inch Hanging Height
Average PPFD – 1077 µmol/(m2s)
5’x5′ Canopy Area – 24 inch Hanging Height
Average PPFD – 971 µmol/(m2s)
5’x5′ Canopy Area – 30 inch Hanging Height
Average PPFD – 829 µmol/(m2s)
5’x5′ Canopy Area – 36 inch Hanging Height
Average PPFD – 836 µmol/(m2s)
Detroit –
First and foremost, Chilled Tech support team is awesome. I had all my emails, questions, and concerns answered with “NO” attitude. My light, a X6 for an 5×5 arrived on time and although I’m not yet finished with my first grow, I’m going to tell’ya; this thing rocks. If your anything like me, I research “EVERY” suppose to be top light out, I won’t list the names, but SF, MH, ES, “G” none of them can touch this thing.💯
Brian Bailey (verified owner) –
This the first review I have left. Finished my test run, I also posted weekly pics and tagged the company on all my Instagram post (@beetlebailey_). I am COMPLETELY satisfied with this purchase. To be honest I did not believe the ROI calculator that I would almost double my yield. I was wrong and oh boy i was wrong. I left open spots on the net and still more than doubled my yields compared to an HPS. I love this light so much I will be replacing my other HPS beginning of next year. This light kept the quality and doubled my yields. Couldn’t be happier!!!
Carl hoogen (verified owner) –
Been using this light for about 2 weeks now and can’t say enough good things about it. It easily covers a 5×5 area with 8 plants in 5 gallon containers. Remote drivers bring the heat load way down. Excited to see how my first flower run goes. Will update the review in a few weeks.
LWG (verified owner) –
These lights are by far the best lights we have seen and used. We did a ton of research as we wanted to replace the HPS for a small commercial grow and it has paid off. The light output is legit, the construction is superb and these run far cooler. We need to mention the guys at ChilLED are top notch – they have gone over and above with their customer support and they totally stand behind their products.
Austin –
Thank you for the comment! We really appreciate the kind words and we hope to continue to get more people to switch from HPS to LED 🙂
Cheers,
-Austin
Jason (verified owner) –
I’ve had this light for about 5 weeks and its been more than ideal. I keep it in a 4×4 which is definately, definately overkill but I wanted to purchase a light that will still be useful for the next years to decades. Even though its not necessary, I keep the light at about 80 to 90% capacity and despite it burning with the passion of a thousand white hot suns, the temperature difference is only about 2 to 5 degrees. Not to mention my plants, which are at the 5th node, have about half an inch between nodes. The distance between the top of the plants and the light is 25 inches. Id also like to mention that there isn’t a single part of the light, including the drivers, that isnt more than mildly warm to the touch.
The light, as with all high grade LEDs, is definately expensive, but believe me, that expense comes with a premium. Every question or issue I’ve had and reached out for has been answered well within an hour. Ive never had such good customer service in any industry.
Daniel Adevai (verified owner) –
I purchased the x6 1000w, I have to say I could not be happier with my decision! The light is beyond reliable and the construction is flawless. The quality you get with this light is something you have to see to believe, I did my research on lights and I can honestly say there is no comparison when it comes to the well built quality you get here.
The team at Chilled Is so helpful, they are are so fast when replying to any questions you may have! All around the quality and support is something I would give more then a 5 star rating to!!
Dowland Lee (verified owner) –
Easily the most powerful grow light’s I have ever owned. Replaced several 1000w HPS, the LED’s run much cooler & promote shorter internodal spacing. Great lights & I highly recommend to anyone getting into LED’s.
Stephen Barnes (verified owner) –
I purchased 2 1000w DIY Growcraft x6. It is unbelievable. The design is flawless. It is very easy to assemble as well. In my opinion, when it comes to LED lights look no further then Chilled…
Kevin Ferry (verified owner) –
I just received my X6 and I couldn’t be happier with my purchase. I ordered 2 lights from another distributor ond have yet to receive the second. This light is for professionals or serious hobbyists looking to cover a honest 5’x5’ flower footprint at 36” and the ppfd nimbers rank as @migrow hoghest and most efficient light to date. Im so proud of my purchase!!!