Passive Cooling Linear Bar Design
Thin Profile – Only 1.375in Tall
Rugged T Slot Bar Design
Oversized surface area for maximum heat dissipation
Remote Power Driver Location
Lower your heat load by removing power driver outside grow area
Growcraft Yield Max Spectrum
SPECTRAL POWER DISTRIBUTION
PAR Intensity Maps
6 in Hanging Height
3’x3′ Canopy Area – 6 in Hanging Height
Average PPFD – 526 µmol/(m2s)
12 in Hanging Height
3’x3′ Canopy Area – 12 in Hanging Height
Average PPFD – 503 µmol/(m2s)
18 in Hanging Height
3’x3′ Canopy Area – 18 in Hanging Height
Average PPFD – 466 µmol/(m2s)
Input Power Draw: 200W
Input Voltage Range: 90-305 VAC
120 VAC Current Draw: 1.67 Amps
208 VAC Current Draw: 0.96 Amps
240 VAC Current Draw: 0.835 Amps
277 VAC Current Draw: 0.72 Amps
Power Driver: Mean Well HLG-185H-48B
AC Power Cord Length: 6.5 ft
DC Extension Cord Length: 7 ft
Dimming Range: 5-100%
Light Engine Efficacy: 2.80 μmole/J
Power Driver Efficiency: 94% @ 230 VAC
Full System Efficacy: 2.63 μmole/J
Operating Temperature Range: 41°F – 95°F | 5°C – 35°C
Operating Humidity Range: 10 – 90% Non-Condensing
Generated Heat Load: 546 BTU/Hour
Minimum Head Space Above Fixture: 6 in
Recommended Hanging Height: 6-24 in
Coverage Area: 2 x 2 & 3 x 3 ft
Start Slow – Growcraft lights have VERY high light output and unless your plants are already acclimated to high light intensity, it is best to start slow with the light hanging high and possibly also dimmed. Then monitor plant reaction over a few days and slowly adjust as needed.
Fixture Dimensions: 22.5 in x 19.5 in x 1.375 in
Fixture Weight: 9.95 Lbs
Kevin Chee (verified owner) –
If you’re in the market for a premium small grow light, definitely recommend this one. High output with adjustable dimmer is just what the doctor ordered for seedlings to mature plants.
Kevin Chee –
If you’re in the market for a premium small grow light, definitely recommend this one. High output with adjustable dimmer is just what the doctor ordered for seedlings to mature plants.
Don (verified owner) –
Just got the 3mini so far so good but time will tell the outcome will let you all know later
Josh (verified owner) –
Theses x3 minis pack a serious punch. I am currently using one in my 3×3 veg area, and have just added an x3 mini and x1 mini to another smaller flower area. Excellent results and extremely well made. If you have ran any growcraft fixtures before this has no difference except size!
ChilLED ftw
Austin Jergenson –
Thank you for the excellent review Josh, I love the Minis too. 🙂
-Austin
Josh Cross (verified owner) –
This thing would be perfect for a 2×2, and you could definitely veg in a 3×3. I’m using it to fill in my 3×7, along with the X3 500, and the coverage is excellent! These diy fixtures are easy to assemble, and the construction is very sturdy, yet not bulky or heavy. Highly recommend, will purchase again!