Growcraft X3 – 330W DIY LED Grow Light Kit

4.92 out of 5
48 customer reviews
(48 customer reviews)

$529.99

SKU: GC-KIT-330-X3 Category:

 

Growcraft Light Spectrum Options

Passive Cooling Linear Bar Design

Thin Profile – Only 1.375in Tall

Rugged T Slot Bar Design

Oversized surface area for maximum heat dissipation

Remote Power Driver Location

Lower your heat load by removing power driver outside grow area

Made In The USA – Finest quality materials and workmanship manufactured at our facility in Arlington, WA

Input Power Draw: 330W
Input Voltage Range: 90-305 VAC

120 VAC Current Draw: 2.8 Amps
208 VAC Current Draw: 1.6 Amps
240 VAC Current Draw: 1.4 Amps
277 VAC Current Draw: 1.2 Amps

Power Driver: Mean Well HLG-320H-48B
AC Power Cord Length: 6.5 ft
DC Extension Cord Length: 7 ft
Dimming Range: 10-100%

Light Engine Efficacy: 3.26 μmole/J – 2.9 μmole/J
Power Driver Efficiency: 95% @ 230 VAC
Full System Efficacy: 3.1 μmole/J – 2.76 μmole/J

Light Bar LED Information:
Samsung 3000K White LEDs – 140 per Light Bar
Samsung 5000K White LEDs – 140 per Light Bar
660nm Deep Red LEDs – 15 per Light  Bar

Warranty: 3-Year Component Warranty

Operating Temperature Range: 41°F – 95°F | 5°C – 35°C
Operating Humidity Range: 10 – 90% Non-Condensing
Generated Heat Load: 1,126 BTU/Hour

Water Protection: Currently, the Growcraft has no protective coating against direct moisture exposure. If moisture accumulates near the LEDs damage may occur. Make sure to point any sprays downward and away from the LEDs.


Use of VOC (Volatile Organic Compounds):
DO NOT USE VOCs, like burning sulfur, near any Growcraft. This can damage the LEDs beyond repair and is NOT covered by our warranty.

Minimum Head Space Above Fixture: 6 in
Recommended Hanging Height:
12-24 in
Recommended Grow Room Ambient Air Temperature: 85°F | 29.5°C
Coverage Area: 2 x 4 ft
Start Slow – Growcraft lights have VERY high light output and unless your plants are already acclimated to high light intensity, it is best to start slow with the light hanging high and possibly also dimmed. Then monitor plant reaction over a few days and slowly adjust as needed.

Fixture Dimensions: 42.5 in x 19.5 in x 1.375 in
Fixture Weight: 17 Lbs

 

PAR Intensity Maps

6 in Hanging Height

2’x4′ Canopy Area – 6 in Hanging Height

Average PPFD – 1274 µmol/(m2s)

12 in Hanging Height

2’x4′ Canopy Area – 12 in Hanging Height

Average PPFD – 1079 µmol/(m2s)

18 in Hanging Height

2’x4′ Canopy Area – 18 in Hanging Height

Average PPFD – 894 µmol/(m2s)

24 in Hanging Height

2’x4′ Canopy Area – 24 in Hanging Height

Average PPFD – 845 µmol/(m2s)

DIY Kit Includes:

2 x Growcraft DIY U-Frame – 2×4
2 x Growcraft DIY U-Frame Cover – 2×4
1 x Growcraft Power Distribution PCB – 2×4
3 x Growcraft 40in Heatsink
3 x Growcraft 40in LED Board
1 x M3 – 6mm Plastite PCB Screw – 5 pack
1 x M3 – 8mm Plastite PCB Screw – 25 pack
1 x M3 – 5mm Countersunk Torx Screw – 25 pack
1 x M4 – 14mm Torx Screw – 25 pack
3 x Growcraft PCB End Cover 2 Pack – ChilLED WHITE
1 x Growcraft Strain Relief Cable Gland – Black
1 x 20 AWG Red & Black Solid Core Wire Pair – 6ft
1 x 48Vdc Pigtail with 2 Pin Female Connector
1 x Push Lock 7ft Driver Extension Cable
1 x Push Lock AC Power Cord (Your Choice of AC Plug)
1 x Push-Lock Mean Well HLG-320H-48B LED Driver
1 x Push-Lock Dimmer Pot
1 x Growcraft DIY U-Frame Hole Plug
4 x Rope Ratchets

Weight & Dimensions

Weight 28.5 lbs
Dimensions 43.45 × 8.95 × 7.7 in
Choose LED Spectrum Type

Flowering Optimized/Full Cycle Spectrum, Vegetative Cycle Optimized Spectrum

Push Lock AC Power Cord

USA 120VAC – NEMA 5-15P (Standard), USA 240VAC – NEMA 6-15P, European – EU1-16P, Australia & New Zealand – AS NZ 3112

48 reviews for Growcraft X3 – 330W DIY LED Grow Light Kit

  1. 4 out of 5
    48 customer reviews

    MNWA (verified owner)

    I got a Growcraft X3 – 330 Watt DIY LED Grow Light Kit. It was fairly easy to assemble even though I’d had no prior experience with electronic wiring. The how-to video and the instructions were a bit confusing at times, though. Other than that, my plants are thriving under this light, and I couldn’t be happier.

  2. 5 out of 5
    48 customer reviews

    Richard kubiak

    Bought the 330 watt 3 bar. Super Simple to Assemble. Use Ig it in A 4/4 tent. Amazing the Fast Healthy Growth. Using only 330 watts. Definitely buying more. Use one on side walls.

  3. 5 out of 5
    48 customer reviews

    Christopher Parker

    ChilLED is simply the best buying experience of my entire grow setup. I purchased a X3 and a DIY X4. The wait time said 45 days but they were shipped in 25 days. I was like a kid on Christmas waiting. I contacted customer service about the time frame of shipping and everytime they answered right away. Once my light got here they were easy to setup with the video installation tutorial. I can express enough how happy I am. I know that I will be a long term customer. Thank you

  4. 5 out of 5
    48 customer reviews

    Condawg (verified owner)

    Set up is easy enough and the light is powerful. Feels a bit barebones due to the functional but janky dimmer switch. Honestly not a big deal imo because I was looking for a good value and these are high quality lights. Be aware however that the DIY lights don’t come with any warranty which makes me a bit uneasy. This is my second purchase so definitely satisfied.

  5. 5 out of 5
    48 customer reviews

    Shawn Gibson (verified owner)

    I bought this light after seeing Vitaly‘s personal story and attention to details for growing indoors with LEDs. I want to support that kind of initiative. The light is great and so far producing good results for tomatoes

  6. 5 out of 5
    48 customer reviews

    Tim (verified owner)

    Putting this light together was a breeze. Make sure you follow the typed out instructions as they have the updated wire color connections, the videos do not. This light is a beast and its currently kicking ass in my 2×4 tent. Temps stay in comfortable range and and my super special “tomatoes” love it! Thanks Chilledtech!

  7. 5 out of 5
    48 customer reviews

    Connor Lewis (verified owner)

    Recently received and built this fixture. Easy assembly! I haven’t ran them yet but I’m very excited to.

  8. 5 out of 5
    48 customer reviews

    Sophanna Mark Troeung

    What company sends you a hand written thank you letter nowadays? ChilLED Tech does. I freaken love this company.

  9. 5 out of 5
    48 customer reviews

    Albert (verified owner)

    Haven’t finished my first grow but so far am in love with my growcraft I was using a homemade cob light fixture that was pretty good but took up to much room in my tent that was needed so this light being so much thinner is awesome

  10. 5 out of 5
    48 customer reviews

    K Wagner (verified owner)

    quality components, easy assembly, personalized timely service and you save some major $ diy. I received some mis matched connectors with my light and they made it right in a flash. invest in some good eye protection

  11. 5 out of 5
    48 customer reviews

    Hans Allen (verified owner)

    I ordered two of these lights when they were being released. This, I want to add, was at the beginning of the Covid19 shutdown. So, these guys were making these in their warehouse, while all of that was going on.
    Great Job!!!
    To anyone who does not know, ChilLED is made here in the USA! The product, like always, is superior to anything else out on the market. I love my new lights. Big thank you to the ChilLED team that could not have been an easy time. -NiceR

  12. 5 out of 5
    48 customer reviews

    Jason Xu (verified owner)

    I was previously using lights from HLG. I’m loving the chilled grow lights a lot more. My plants have begun flowering and look amazing. Setup was easy. I found the instructional pdf to be more helpful than the video.

  13. 4 out of 5
    48 customer reviews

    Bezalel Nebari (verified owner)

    I built my X3 light yesterday. It took me a couple hours, because the how-to videos were a bit confusing to me. I wish it had more detailed instructions (also wish the music in the background wasn’t there, as it is annoying and distracting). For example, I wish you guys explained how to use the wago connectors. I also wish you guys were more clear in explaining how to line up the boards so that the + and – are the on the same ends. I know I’m not the only one who screwed it onto the frame and has to unscrew it to turn one of the boards around. The light is incredible, but the instructional video on how to build it was disappointing, and felt rushed and not really well made. Once I figured out the steps to build it, it was actually very simple. The design is extremely well thought out and I respect that. Everything has a purpose, and it has many little details that make it worth its price. It is beautiful, once fully put together. As an artist myself, I am happy to have this light in my house because it really is as beautiful as it is functional/practical.

  14. 5 out of 5
    48 customer reviews

    Lonny B (verified owner)

    I didn’t realize I had to sign for it. Cost me the weekend! I’m amazed at the fit and finish of everything. Went together with out any problems. Love this light

  15. 5 out of 5
    48 customer reviews

    Sean Happel (verified owner)

    I was able to put the light together no problem. Dimmer switch works amazing. Seems to be one of the best lights on the market.

  16. 5 out of 5
    48 customer reviews

    Mr. Dab (verified owner)

    Absolutely love this light!! Let me just say the diy kit is easy to assemble and you are probably just like me and see the price and your like I dont know let me tell you it’s the best light I’ve come across. Hands down above the rest in every aspect. Love the light chill keep up the good work bringing the public a QUALITY light. They told me they wanted an honest review so here it is I’m 100 percent regular person that owns a quality chill led now and love it so much

  17. 5 out of 5
    48 customer reviews

    Aaron Scalise (verified owner)

    This kit was super easy and very fun to assemble. Everything was manufactured perfect.
    I currently have a beefsteak tomato and Boston cucumber under this light. I had them under a t5 light and they did alright but once I put them under this led light, they literally doubled in size in a couple of weeks.
    I am going to buy another one for sure to fit in my 5×5 tent.

  18. 5 out of 5
    48 customer reviews

    Isabella Rambi

    Just received my kit today everything is flawless could not be more happy.thank you to everyone at chilled

  19. 5 out of 5
    48 customer reviews

    Malaisha Ford (verified owner)

    Its a Good light. easy to put together. worth every penny

  20. 5 out of 5
    48 customer reviews

    Adam (verified owner)

    Great light and easy to put together. I’m happy so far with this light. Well worth every dollar i spent. Would love to have another!

Add a review

Your email address will not be published. Required fields are marked *