Chilled Tech - LED Grow Lights & Spectrum Control
Commercial & DIY LED grow lights - Highest efficiency, power & quality - Made in USA
Thin Profile – Only 1.375in Tall
Oversized surface area for maximum heat dissipation
Lower your heat load by removing the power driver outside grow area
Made In The USA – Finest quality materials and workmanship manufactured at our facility in Arlington, WA
Input Power Draw: 330W
Input Voltage Range: 90-305 VAC
120 VAC Current Draw: 2.8 Amps
208 VAC Current Draw: 1.6 Amps
240 VAC Current Draw: 1.4 Amps
277 VAC Current Draw: 1.2 Amps
Power Driver: Mean Well HLG-320H-48B
AC Power Cord Length: 6.5 ft
DC Extension Cord Length: 7 ft
Dimming Range: 5-100%
Light Engine Efficacy: 2.97 μmole/J – 2.75 μmole/J
Power Driver Efficiency: 95% @ 230 VAC
Full System Efficacy: 2.82 μmole/J – 2.61 μmole/J
Warranty: 3-Year Component Warranty
Operating Temperature Range: 41°F – 95°F | 5°C – 35°C
Operating Humidity Range: 10 – 90% Non-Condensing
Generated Heat Load: 1126 BTU/Hour
Water Protection: Currently, the Growcraft has no protective coating against direct moisture exposure. If moisture accumulates near the LEDs damage may occur. Make sure to point any sprays downward and away from the LEDs.
Use of VOC (Volatile Organic Compounds): DO NOT USE VOCs, like burning sulfur, near any Growcraft. This can damage the LEDs beyond repair and is NOT covered by our warranty.
Minimum Head Space Above Fixture: 6 in
Recommended Hanging Height: 6-24 in
Coverage Area: 2 x 4 ft
Start Slow – Growcraft lights have VERY high light output and unless your plants are already acclimated to high light intensity, it is best to start slow with the light hanging high and possibly also dimmed. Then monitor plant reaction over a few days and slowly adjust as needed.
Fixture Dimensions: 22.5 in x 42.5 in x 1.375 in
Fixture Weight: x.xx Lbs
Average PPFD – 1358 µmol/(m2s)
Average PPFD – 1100 µmol/(m2s)
Average PPFD – 941 µmol/(m2s)
Average PPFD – 836 µmol/(m2s)
2 x Growcraft DIY U-Frame – 4×4
2 x Growcraft DIY U-Frame Cover – 4×4
1 x Growcraft Power Distribution PCB – 4×4
6 x Growcraft 20in Heatsink
6 x Growcraft 20in LED Board
1 x M3 – 6mm Plastite PCB Screw – 5 pack
1 x M3 – 8mm Plastite PCB Screw – 25 pack
1 x M3 – 5mm Countersunk Torx Screw – 25 pack
1 x M4 – 14mm Torx Screw – 25 pack
3 x Growcraft PCB End Cover 2 Pack – ChilLED WHITE
1 x Growcraft Strain Relief Cable Gland – Black
1 x 20 AWG Red & Black Solid Core Wire Pair – 6ft
1 x 7ft Lock Driver Extension
1 x 120VAC USA Power Cord – 6.5ft
1 x MEAN WELL HLG-320H-48B LED Driver
2 x WAGO 221-412 Wire Splicing Connector (5 Pack)
1 x Dimmer Pot
1 x Growcraft DIY U-Frame Hole Plug
4 x Rope Ratchets
1 x 2×4 Fixture Pig Tail
1 x Push Lock AC Power Cord
6 x Growcraft PCB End Cover 2 Pack – ChilLED BLUE
6 x Growcraft PCB End Cover 2 Pack – ChilLED RED
| Weight | 31.6 lbs |
|---|---|
| Dimensions | 45 × 10 × 9 in |
| Choose LED Spectrum Type | Flowering Optimized/Full Cycle Spectrum, Vegetative Cycle Optimized Spectrum |
| Push Lock AC Power Cord | USA 120VAC – NEMA 5-15P (Standard), USA 240VAC – NEMA 6-15P, European – EU1-16P, Australia & New Zealand – AS NZ 3112 |
RickyDee (verified owner) –
ChilLed Growcraft X6 Mini is a beast, completely crushes a 2×4. And the quality of their lights are just unmatched, super solid light
Gabrielle –
Thank you, RickyDee for sharing with us all how your X6 Mini is treating you and your grow 🙂
B (verified owner) –
I was a bit hesitant at the price point but after looking at the market for a few weeks I decided to pull the trigger. Noticeably higher efficacy on this light so the cost up front will pay itself off shortly. The quality is of the highest, I cannot recommend this light enough.
Gabrielle –
Love to hear that! Thank you so much for giving ChilLED a chance in your growing space. We are so honored. 🙂 Happy growing.
Scott C (verified owner) –
The X6 mini is my second light purchase! The light works amazing currently using it for my veg & Chilled has the best customer service team true professionals!!!
Gabrielle –
Thank you so much, Scott! We are so grateful for your support and appreciation.
Jack Swanson (verified owner) –
This is not my first ChilLED Tech and will not be my last. I loved my x3 diy 330 so much I bought their x6 diy. Hard to compare the two, but in a limited height space you cannot beat this light!
Gabrielle –
Thank you Jack for taking the time to leave a great review. Glad our grow lights exceeded your needs and wants 🙂 Happy growing!
Todd Grimm (verified owner) –
Not my first ChilLed Tech light, and just my others, this light is outstanding. Remote placement of the power supply means temps in the tent are never a problem. Incredible light output on max, and even more incredible efficiency when dimmed. Do yourself a favor, buy the Push Lock Connector DIY starter kit if you buy the DIY version of this light.
Moises (verified owner) –
Holly cow this growcraft x6 mini is strong and bright on full blast , came in quick with the 5 day processing , wish I can upload a Picture of my grow n the light , fits just right in a 2×4 tent . Thanks again Chilled, you guys are the best with making high quality lights !
Gabrielle –
Yay! Happy to hear you are enjoying the new X6 Mini 🙂 Would love to see a picture of your setup Moises! Send it to us at service@chilledgrowlights.com or to our social accounts! Happy growing.