Growcraft X3 – 500 Watt DIY LED Grow Light Kit

4.95 out of 5
22 customer reviews
(22 customer reviews)

$649.99

SKU: GC-KIT-500-X3 Category:

Growcraft Light Spectrum Options

 

Passive Cooling Linear Bar Design

Thin Profile – Only 1.375in Tall

Rugged T Slot Bar Design

Oversized surface area for maximum heat dissipation

Remote Power Driver Location

Lower your heat load by removing power driver outside grow area

 

Assembly Instructions Video

Made in the USA – Finest quality materials and workmanship

Input Power Draw: 500W
Input Voltage Range: 90-305 VAC

120 VAC Current Draw: 4.2 Amps
208 VAC Current Draw: 2.4 Amps
240 VAC Current Draw: 2.1 Amps
277 VAC Current Draw: 1.8 Amps

Power Driver: Mean Well HLG-480H-48B
AC Power Cord Length: 6.5 ft
DC Extension Cord Length: 7 ft
Dimming Range: 5-100%

Light Engine Efficacy: 3.26 μmole/J – 2.73 μmole/J
Power Driver Efficiency: 94.5% @ 230 VAC
Full System Efficacy: 3.08 μmole/J – 2.58 μmole/J

Light Bar LED Information:
Samsung 3000K White LEDs – 140 per Light Bar
Samsung 5000K White LEDs – 140 per Light Bar
660nm Deep Red LEDs – 15 per Light  Bar

Warranty: 3-Year DIY Kits Warranty Included

Operating Temperature Range: 41°F – 95°F | 5°C – 35°C
Operating Humidity Range: 10 – 90% Non-Condensing
Generated Heat Load: 1,706 BTU/Hour

Water Protection: Currently the Growcraft has no protective coating against direct moisture exposure. If moisture accumulates near the LEDs damage may occur. Make sure to point any sprays downward and away from the LEDs.

Use of VOC (Volatile Organic Compounds): DO NOT USE VOCs, like burning sulfur, near any Growcraft. This can damage the LEDs beyond repair and is NOT covered by our warranty.

Minimum Head Space Above Fixture: 10 in
Recommended Hanging Height:
18-30 in
Recommended Grow Room Ambient Air Temperature: 85°F | 29.5°C
Coverage Area: 3 x 5 ft
Start Slow – Growcraft lights have VERY high light output and unless your plants are already acclimated to high light intensity, it is best to start slow with the light hanging high and possibly also dimmed. Then monitor plant reaction over a few days and slowly adjust as needed.

Fixture Dimensions: 42.5 in x 19.5 in x 1.375 in
Fixture Weight: 17 Lbs

 

PAR Intensity Maps

6 in Hanging Height

3’x5′ Canopy Area – 6 inch Hanging Height

Average PPFD – 1,185 µmol/(m2s)

12 in Hanging Height

3’x5′ Canopy Area – 12 inch Hanging Height

Average PPFD – 943 µmol/(m2s)

18 in Hanging Height

3’x5′ Canopy Area – 18 inch Hanging Height

Average PPFD – 815 µmol/(m2s)

24 in Hanging Height

3’x5′ Canopy Area – 24 inch Hanging Height

Average PPFD – 746 µmol/(m2s)

30 in Hanging Height

3’x5′ Canopy Area – 30 inch Hanging Height

Average PPFD – 681 µmol/(m2s)

36 in Hanging Height

3’x5′ Canopy Area – 36 inch Hanging Height

Average PPFD – 603 µmol/(m2s)

Growcraft X3 – 500 Watt DIY LED Grow Light Kit Includes:

2 x Growcraft DIY U-Frame – 2×4
2 x Growcraft DIY U-Frame Cover – 2×4
1 x Growcraft Power Distribution PCB – 2×4
3 x Growcraft 40in Heatsink
3 x Growcraft 40in LED Board
1 x M3 – 6mm Plastite PCB Screw – 5 pack
1 x M3 – 8mm Plastite PCB Screw – 25 pack
1 x M3 – 5mm Countersunk Torx Screw – 25 pack
1 x M4 – 14mm Torx Screw – 25 pack
3 x Growcraft PCB End Cover 2 Pack – ChilLED WHITE
1 x Growcraft Strain Relief Cable Gland – Black
1 x 20 AWG Red & Black Solid Core Wire Pair – 6ft
1 x 48Vdc Pigtail with 2 Pin Female Connector
1 x Push Lock 7ft Driver Extension Cable
1 x Push Lock AC Power Cord (Your Choice of AC Plug)
1 x Push-Lock Mean Well HLG-480H-48B LED Driver
1 x Push-Lock Dimmer Pot
1 x Growcraft DIY U-Frame Hole Plug
4 x Rope Ratchets

Complete Step By Step DIY Kit Assembly Instructions

Weight & Dimensions

Weight 28 lbs
Dimensions 43.45 × 8.95 × 7.7 in
Choose LED Spectrum Type

Flowering Optimized/Full Cycle Spectrum, Vegetative Cycle Optimized Spectrum

AC Power Plug

USA 120V (Standard), USA 240V, EU Plug, Australia & New Zealand

22 reviews for Growcraft X3 – 500 Watt DIY LED Grow Light Kit

  1. 5 out of 5
    22 customer reviews

    Russell Sheldon (verified owner)

    I bought the X3 500 do it yourself Ki last month. This light is as good as the X4 600 that I bought last year. I bought the light to replace two Sunco 80 watt purple lights. I wouldn’t have bought these lights if they didn’t meet all of my needs. The light is fantastic and fits in a 4 x 2 tent perfectly. It does not need full power to get great growth. The kit is easy to put together, however I think the commercial units are better because of the push lock connectors, a better dimmer switch and the warranty.
    I do not regret purchasing this light. This light is as good as the other one I have. I would highly recommend that anyone looking to purchase a high-quality light not to keep looking and buy a Chilled product.

  2. 5 out of 5
    22 customer reviews

    Michael (verified owner)

    My light arrived ahead of schedule, was easy to assemble, and is super duper bright.
    The construction feels solid and designed well. I highly recommend ChilLed products and I think I will be ordering again in the future.
    My plants are also very happy.

    • Gabrielle

      Thank you so much for the review! We are happy to hear that you and your plants are enjoying the new lights!

Add a review

Your email address will not be published. Required fields are marked *