Sale!

ChilLED Connect – 750w/1000w Controllable DIY Package

$1,349.00 $1,199.00 + Options

The all new  ChilLED Connect 750w & 1000w controllable kits feature a carefully curated selection of high end components that all quick connect together for fast & easy assembly.    We have paired our incredibly efficient 226 diode (125w) boards with the best selection of controllable Meanwell HLG drivers. The ChilLED connect system makes assembly easier than ever before. No soldering is required and minimal tools are needed for successful installation. Just supply your own light frame and you can be up and running in minutes with our quick connected, modular, expandable DRIVE HUB. If you have dreamed of manipulating different spectra while controlling intensity, sunrise and sunset in a DIY LED growlight this package is for you. If you have admired our commercial LED fixtures this package delivers ChilLED controllable technology with DIY savings.

The 750w kit is designed for extremely high PPFD, CO2 enriched 4′ x 4′ grow spaces, or up to 4′ x 6′ spaces with environmental CO2 levels (300-400ppm).

The 1000w drop down option adds all necessary accessories & wiring to support a fourth 250w (22″ long) double light engine. 1000w upgrade option also replaces the (2) HLG-185H-C1400B to (2) HLG-320H-C1400B drivers.

 

This product can be reliably dimmed for use in smaller spaces as well.  Sunrise/sunset mode has been proven to stabilize humidity spikes , especially at lights off.  This is an important feature that has been shown to reduce powdery mildew outbreaks according to several customer data log reports.

3000K white leds, 450nm/UVA blue leds, and 630/660nm red leds can all be dimmed and adjusted to suit the needs of plants from seed to harvest.

All ChilLED diy kits are a direct fit to Rapid LED’s rail system by using our 3D printed (PETG + carbon fiber) mounting spacers.

There are (4) drivers + ChilLED Drive to mount.  If using RapidLED’s substrate system, (5) pairs of driver brackets will be needed, or (10.5″ x 24″) piece of aluminum for remote mounted panels.

OUTPUT  

All ChilLED 226 diode light engines operate at 2.7 µmol/J chip level.  We constantly pursue not only the highest flux bin leds, but we have been able to source the most desirable voltage bin leds in all classes.  After driver and optical losses, most of our kits using HLG320 drivers clock in at 2.5 µmol/J system level.

750w kit total PAR output: 1875 µmol/s , 1260 PPFD at the source in a 4′ x 4′ , 1009 PPFD in a 4′ x 5′

1000w kit total PAR output: 2500 µmol/s, 1126 PPFD at the source of the light engine in a 4′ x 6′ space. 841 PPFD in a 4′ x 8′ (µmol/s/m2)

 

The ChilLED Drive units included in these kits can handle and manage 10 amps of AC power.  They are universal input voltage, 1200w on 120VAC, 2400w capable on 240VAC.

 

 

In stock

Already Own A GEN2 Controller?

NOTE: This package includes the ChilLED GEN2 external controller required for this setup to function. If you are a returning customer use the dropdown box below to exclude the controller if you already own one.

Rapid Rail mounting spacers & screws.

3D printed RapidLED Substrate Rail mounting spacers & screws (direct fit for RapidLED substrate).

Make it 1000w

Add a 4th 250 watt light engine & upgrade my drivers to a 1000w , 4’x 8′ coverage system

Description

Included with the 750w Controllable DIY LED kit:

  •  1 x (JUST RELEASED!!!) ChilLED Drive + Controller
  • 3 x ChilLED 226 diode DOUBLE LED light engines 250w each(Pre-assembled)
  • 3 x 12vdc 120mm waterproof fans (w/ quick connect, wiring, hardware)
  • 3 x Fan to heatsink mounting & wiring kits
  • 1 x Meanwell HLG-120H-C1050B driver (Blue channel)
  • 1 x Meanwell HLG-240H-C1050B driver (Red channel)
  • 2 x Meanwell HLG-185H-C1400B driver (White channels)
  • Factory made quick connect wire harnesses for all components
  • 1 x 120VAC USA NEMA power cord
  • 1 x Full color instructions for a quick and easy assembly

Please note: All of the wire harnesses, connectors and wire lengths included with this product are factory build to suit a common 36″ x 36″ DIY light frame. ChilLED Tech cannot anticipate every possible frame configuration. Users may be required to extend wires or add additional wire for non conventional light builds.

Additional information

Weight 38 lbs
Dimensions 30 x 12 x 12 in

Reviews

There are no reviews yet.

Be the first to review “ChilLED Connect – 750w/1000w Controllable DIY Package”

Your email address will not be published. Required fields are marked *