Guardian Kit For Growcraft 330W & 500W Lights

From: $0.00

Estimated Release Date: December 31, 2022

Due to supply chain delays, production of all Guardian components has been postponed. The current estimated production date is exaggerated to avoid any further postponement for new orders.

All pre-orders placed before Jan 1, 2022, will have priority processing.

Please feel free to contact us with any questions and thank you for your patience.

To make ordering easier we have put together this guided kit for our 330W and 500W Growcraft fixtures.

Please read each item’s description and make your selections. Add to cart is at the bottom of the options.

Tip: You can open the option’s product page by clicking the blue box arrow to the right of each product title.

This is the Guardian system upgrade for your Growcraft light fixture, adding spectrum control and environmental monitoring.
(Growcraft main light fixture not included)

5 Channel Spectrum Light Bar

Select the number of Spectrum Bars you would like for your Growcraft light.

Recommendations:
X2-330: 1 Spectrum Bar
X3-330: 2 Spectrum Bars
X3-500: 2 Spectrum Bars

More bars = better uniformity, total power per channel, and higher spectrum control range.

Can start with fewer bars now and add more bars to your light later but please be mindful of the supply constraints.

Out of stock

Companion Touchscreen Interface

REQUIRED - iF you plan on using the full features of the Guardian system such as environmental sensors, data logging, historical charting, text/email alerts, and much more.

OPTIONAL- if you only plan on using the dimming functions and have a 3rd party multi-channel controller that can provide the dimming signals to the Growroom Input Node.

Out of stock

Growroom Controller Input Node

REQUIRED - The Input Node interfaces between the touchscreen controller/3rd party controller/basic dimming pots and the light driver node.

1 Input Node is required per grow room and can network up to 100 Light Driver Nodes/grow lights.

Out of stock

Modular Light Driver Node

Modular Light Driver Node & Advanced Light Driver Node are the physical devices that power the spectrum bars and dim the main light.

Up to 100 Driver Nodes can be daisy-chained for networking with the Growroom Input Node.

WHICH DRIVER NODE SHOULD I GET?
- The Modular Light Driver Node - will be shipping in August. It requires 5 LDD modules to be installed into it and the LDD modules drive the Spectrum Bar channels. It also has 2 dimming outputs to dim your main Growcraft grow light on which you install the Spectrum Bars.

- The Advanced Light Driver Node - will be shipping in November. It doesn't need any LDD modules as it has all 8 power channels built-in and will power your main Growcraft grow light as well as the Spectrum Bars you install on this light.

DO I NEED BOTH?
- No, only one of the 2 Driver Nodes is needed per grow light.
You can order both if you want to later be able to use the Advanced Driver Node when it ships.

Out of stock

Advanced Light Driver Node

Choose either the Advanced Driver Node or the Modular Driver Node per grow light and spectrum bar set.

Read the description above to decide which you would like to order or if you would want to get both.

The Advanced Driver Node doesn't need any LDD Modules as all 8 LED driver channels are built into the device and current is programmed as needed for each channel.

Temporarily unavailable

Push-Lock Mean Well HLG-185H-48A Driver

REQUIRED - if you selected the Modular Driver Node. This power supply provides power for the Modular Driver Node and the LDD Modules you install.

Don't select it if you will only be using the Advanced Driver Module, as it requires the 600w driver listed below.

Out of stock

Push-Lock Mean Well HLG-600H-48A Driver

REQUIRED - if you selected the Advanced Driver Node. This power supply provides power for the Advanced Driver Node, which intern powers your spectrum bars and main Growcraft light.

Don't select it if you will only be using the Modular Driver Node, as it requires the driver listed above.

Out of stock

Guardian Temperature & Humidity Sensor

OPTIONAL - up to 2 sensors can be connected to each Light Driver Node.

We recommend at least one sensor per grow room. If you also want to monitor CO2 then select the sensor below.

Out of stock

Guardian Temperature, Humidity & CO2 Sensor

OPTIONAL - up to 2 sensors can be connected to each Light Driver Node.

We recommend at least one sensor per grow room. If you don't want to monitor CO2 then select the sensor above.

Out of stock

No longer available for pre-ordering

Want to be notified when this product is back in stock?

SKU: GS-330-500-KIT Category:

Description

Share
Tweet
Pin
Share
Email
Print

Guardian Control System Layout

Modular Driver Node Layout Example

To make ordering easier we have put together this guided kit for our 330W and 500W Growcraft fixtures.

Please read each item’s description and make your selections. Add to cart is at the bottom of the options.

Tip: You can open the option’s product page by clicking the blue box arrow to the right of each product title.

This is the Guardian system upgrade for your Growcraft light fixture, adding spectrum control and environmental monitoring.
(Growcraft main light fixture not included)

Product information will continue to be added throughout the next week. Try to put your order in early to save your spot – production will be limited due to the global semiconductor shortages. All pre-orders are fully refundable until they are shipped, so if you change your mind you can cancel your order but if you decide to order later and no stock is left then you’ll need to wait until the next production batch. Chip suppliers are quoting at least 8 to 12 month lead times so another batch will not ship until this time next year.

 

Additional information

Weight 5 lbs
Dimensions 12 × 12 × 12 in

5 Channel Spectrum Light Bar

Weight 2.5 lbs
Dimensions 43 × 2.5 × 2.5 in

Companion Touchscreen Interface

Weight 2.6 lbs
Dimensions 11 × 8.25 × 2.25 in

Growroom Controller Input Node

Weight 1.5 lbs
Dimensions 8 × 6 × 3 in

Modular Light Driver Node

Weight 2 lbs
Dimensions 8 × 6 × 4 in

Advanced Light Driver Node

Weight 5 lbs
Dimensions 12 × 8 × 6 in

Push-Lock Mean Well HLG-185H-48A Driver

Weight 2.75 lbs
Dimensions 11.5 × 3.6 × 2 in

Push-Lock Mean Well HLG-600H-48A Driver

Weight 10.7 lbs
Dimensions 16.75 × 7.1 × 2.9 in

Guardian Temperature & Humidity Sensor

Weight 1 lbs

Guardian Temperature, Humidity & CO2 Sensor

Weight 1.1 lbs
Dimensions 6 × 6 × 6 in

Reviews

There are no reviews yet.

Be the first to review “Guardian Kit For Growcraft 330W & 500W Lights”

Your email address will not be published. Required fields are marked *